Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES
We found 763 results matching your criteria.
Choose a sub category:
CHAIN - PROOF COIL CHAIN - HIGH TEST CHAIN - STRAIGHT LINK
CHAIN - TWIST LINK CHAIN - JACK CHAIN - TWIN LOOP
CHAIN - SASH CHAIN - DECORATIVE CHAIN - PLASTIC
CHAIN - SPECIALTY GRAB HOOKS SLIP HOOKS
SHACKLES CHAIN - COLD SHUTS CHAIN - LAP LINKS
CHAIN - QUICK LINKS CHAIN - SNAP LINKS CHAIN - SWIVELS
CHAIN - CLEVIS LINKS SPECIALTY FARM HITCH PINS
ANCHOR SHACKLES CLEVISES & PINS SNAPS
WELDED RINGS CHAIN HOISTS LOAD BINDERS
POWER HOISTS ROLLER CHAINS & PARTS
Sort By:
1 2 3 ... 26
Speeco 07090100/2702 Standard Tractor Lynch Pin Speeco 07091900/3548 Standard Tractor Lynch Pin Speeco 07090400/2704 Standard Tractor Lynch Pin
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
Speeco 07091500/2709 Standard Tractor Lynch Pin National Hardware 3152BC Lap Link Campbell T7665012 Welded Ring
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. National Hardware Lap Link, Series: 3152BC, 1/8 in, Steel, Zinc Plated, 120 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain Campbell Welded Ring, 1 in Length X 0.18 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity
SHUT COLD ZINC PLATED 3/16IN  National Hardware 3152BC Lap Link Speeco 07090800/2698 Tractor Lynch Pin
Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. National Hardware Lap Link, Series: 3152BC, 3/16 in, Steel, Zinc Plated, 225 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
Fehr Bros 3/16 Anchor Shackle CAMPBELL 014-0323 PROOF COIL CHAIN Campbell T4900324 Cold Shut
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
National Hardware 3153BC Cold Shut Campbell T4900424 Cold Shut Campbell T5950124 Repair Lap Link
National Hardware Cold Shut, Series: 3153BC, 1/4 in, 0.24 in Rod Diameter, 0.26 in Hole Diameter, Steel, Zinc Plated, 1250 lb Load Capacity, 1.61 in Width, For Use to Couple Chain Attachments Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit.
National Hardware 3152BC Lap Link SPRING SNAP STEEL ZN 3/16     Fehr Bros 1/4IN Anchor Shackle
National Hardware Lap Link, Series: 3152BC, 1/4 in, Steel, Zinc Plated, 500 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
Campbell T7665032 Welded Ring National Hardware 3155BC Ring Campbell T7661152 Welded Ring
Campbell Welded Ring, NO 7 Chain, 1-1/4 in Length X 0.18 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity National Hardware Ring, Series: 3155BC, NO 7 X 1 in, Steel, Zinc Plated, 195 lb Load Capacity, For Rope, Chain and Strap Campbell Welded Ring, NO 3 Chain, 2 in Length X 0.24 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity
National Hardware 3153BC Cold Shut Speeco 07091300/3027 Tractor Lynch Pin National Hardware 3155BC Ring
National Hardware Cold Shut, Series: 3153BC, 5/16 in, 0.32 in Rod Diameter, 0.35 in Hole Diameter, Steel, Zinc Plated, 1900 lb Load Capacity, 1.94 in Width, For Use to Couple Chain Attachments Forged fasteners for numerous farm and other applications. 3 pins. Black powder coat finish. National Hardware Ring, Series: 3155BC, NO 4 X 1-1/4 in, Steel, Zinc Plated, 270 lb Load Capacity, For Rope, Chain and Strap
National Hardware 3155BC Ring National Hardware 3155BC Ring Campbell T4900524 Cold Shut
RINGS #7X1IN BRS
Price: $1.19
National Hardware Ring, Series: 3155BC, NO 3 X 1-1/2 in, Steel, Zinc Plated, 300 lb Load Capacity, For Rope, Chain and Strap National Hardware Ring, Series: 3155BC, NO 7 X 1 in, Steel, Brass, 195 lb Load Capacity, For Rope, Chain and Strap Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
Campbell T4900624 Cold Shut Speeco 07094000/00266 Round Loop PTO Locking Pin Speeco 07093900/00276 Square Loop PTO Locking Pin
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Numerous farm, lawn, and garden and industrial applications. 2-1/4 usable inches, zinc-plated.
   
 
1 2 3 ... 26