Home > PLUMBING > KITCHEN & BATH > DRAIN & SUPPLY
We found 328 results matching your criteria.
Choose a sub category:
SUPPLY LINES SUPPLYADAPTERS & CONNECTORS ICEMAKER SUPPLY LINES
TUBULAR DRAIN - PLASTIC TUBULAR DRAIN - METAL FLOOR DRAINS AND TRAPS
POP-UP ASSEMBLY / PARTS
Sort By:
1 2 3 ... 11
TAILPIECE FLANGE 1-1/2ODX4 WHT Plumb Pak PP20552 Extension Tube Plumb Pak PP20944 Extension Tube
Fits slip joint or direct connect tubes. Includes tailpiece with two nuts and washers. Plumb Pak Extension Tube, 1-1/2 in Dia X 6 in Length, Slip Joint, PVC, White Plumb Pak Extension Tube, 1-1/4 in Dia X 6 in Length, Slip Joint, PVC, White
Plumb Pak PP20554 Sink Drain Coupling Plumb Pak PP20999 Drain Pipe Adapter TAILPIECE FLANGE 1-1/2ODX6 WHT
With 1-1/2" x 1-1/4" reducing washers. Plumb Pak Drain Pipe Adapter, 1-1/2 in Nominal, Solvent Weld X Compression End, Plastic, White Fits slip joint or direct connect tubes. Includes tailpiece with two nuts and washers.
TUBE EXTEN SLIP 1-1/2X6IN WHT Plumb Pak PP20668 Master End Outlet Tee and Tailpiece With Baffle Plumb Pak PP205512 Extension Tube
For kitchen and bathroom sink drains. Connects to either plastic or metal inlets. Plumb Pak Master End Outlet Tee and Tailpiece, 1-1/2 in Nominal, Slip/Direct End, Plastic, White Plumb Pak Extension Tube, 1-1/2 in Dia X 12 in Length, Slip Joint, Plastic, White
ROD CLIP POP-UP BATHROOM      TEE CENTER OUTLET 1-1/2IN WHT Plumb Pak PP20664 Master Dishwasher Tailpiece
Metal construction. Includes one small hole clevis clip and one large clevis clip. Fits most sinks. Fits slip joint tubes. Includes center outlet with two nuts and washers. 1-1/2" diameter. For use with hose or clamp.
P-TRAP SLIP JOINT 1-1/2IN WHT TRAP ADAPTER 1-1/2IN WHITE    Plumb Pak PP20945 Extension Tube
For kitchen and bathroom sink drains. Includes P-trap with two nuts. Fits slip joint tubes. Includes trap adapter with on nut and washer. 1-1/2" diameter. Plumb Pak Extension Tube, 1-1/4 in Dia X 12 in Length, Slip Joint, PVC, White
Plumb Pak PP20905 Sink Tailpiece Plumb Pak PP905W Sink Tailpiece Oatey 42757 Condensate P-Trap
Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 6 in Length, Flanged, PVC, White Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 6 in Length, Flanged, PVC, White, For Kitchen Use One-piece design. Made from 3/4" PVC Schedule 40 DWV pipe.
Oatey 43560 Snap-In Drain Worldwide Sourcing DWC-100 Dishwasher Connector TAILPIECE FLANG 1-1/2ODX12 WHT
Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Connects dishwasher drain hose to sink drain or to a garbage disposal. Made of flexible PVC. Fits slip joint or direct connect tubes. Includes tailpiece with two nuts and washers.
Plumb Pak PP20558 Reducer Coupling Oatey 42758 Condensate Running Trap J-BEND TRAP SLIP 1-1/2IN WHIT
1-1/2" slip joint x 1-1/4" solvent weld. One-piece design. Made from 3/4" PVC Schedule 40 DWV pipe For kitchen and bathroom sink drains. 1-1/2"  or 1-1/4" inlet.
TUBE ELBOW 1-1/2IN 90DEG WHT  WALL BEND PLASTIC 1-1/4X8 WHT Plumb Pak PP20946 J-Bend
90 degree. Provides a liquid seal between the home and sewer gasses. Includes elbow tube with two nuts and washers. 1-1/2" OD. For use in tubular sink drain applications. For P or S traps.
Plumb Pak PP20555 Sink Drain Pipe Elbow With Reducing Washer Oatey 42021 Replacement Round Snap-Tite Strainer P-TRAP SWIVEL SLIP 1-1/2 WHITE
1-1/2" x 1-1/2" with 1-1/2" x 1-1/4" reducing washer. 6-3/4" white plastic replacement strainer. Screws included.Carded. For kitchen and bathroom sink drains. 1-1/2" diameter. Includes swivel P-trap with two nuts.
   
 
1 2 3 ... 11