Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL CONNECTORS
We found 922 results matching your criteria.
Choose a sub category:
WIRENUTS / CONNECTORS TERMINAL LUGS ELECTRICAL TAPE/DUCT SEAL
WIRE TERMINAL ENDS TUBING & WRAPS ANTI-OXIDANTS
SPLIT BOLT CONNECTORS SPLICER / REDUCERS CABLE STAPLES
CABLE TIES WIRE CLAMPS/CLIPS GLUES / CEMENTS
WIRE MANAGEMENT KITS ELECTRICAL BUSHINGS ELECTRICAL GROMMETS
MISC WIRING CONNECTORS
Sort By:
1 2 3 ... 31
INTERTAPE 602 ELECTRICAL TAPE TAPE ELECT VNYL BLK 3/4INX60FT Gardner Bender GSE-15310 Service Entrance Staple
Black vinyl electrical tape for common electrical uses. 7 mil., UL Approved. Secures service entrance cable. Pointed offset legs drive in straight, will not split wood. High quality carbon steel for durability and easy nailing.
Intertape 602 Electrical Tape Calterm 49305 Electrical Tape 30 ft L x 7.5 mil T Mintcraft CV200S-253L Cable Tie
General purpose electrical insulating tape, good dielectric strength. 7 mils thick. UL Listed and CSA Certified. Black PVC electrical tape is UL Listed to 600 volt. 7.5 mil. thickness and a temperature rating up to 80 degrees Celsius/176 degrees Fahrenheit. Elongation of 200 percent allows tight wrapping and sealing. For wire tying, bundling and other fastening uses. Meets flammability classification UL94V-2.
INTERTAPE 85831 ELECTRICAL TAPE INTERTAPE 85827 ELECTRICAL TAPE INTERTAPE 85832 ELECTRICAL TAPE
INTERTAPE 85828 ELECTRICAL TAPE INTERTAPE 85830 ELECTRICAL TAPE WireGard 19-AWC Assortment Wire Connector Kit
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
WireGard 19-001 Twist-On Wire Connector WireGard 19-002 Twist-On Wire Connector WireGard 19-003 Twist-On Wire Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
WireGard 19-004 Twist-On Wire Connector WireGard 19-006 Twist-On Wire Connector WingGard 19-084 Twist-On Wire Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
WingGard 19-086 Twist-On Wire Connector Hex-Lok 19-2H2 Hex Lock Wire Connector WingGard 19-089 Twist-On Wire Connector
Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
GreenGard 19-095 Grounding Wire Connector Mintcraft CV200SW-253L Cable Tie Gardner Bender PPC-1525 1-Hole Cable Clamp
Specifically designed for making positive ground connections. Connectors feature the same live-action as WingGard connectors with the added plating protection for corrosion resistance in grounding applications. Contoured, offset wings enable firm ground connections with the twist of a hand. Flame retardant, themoplastic shell resists punctures, cuts, abrasion and corrosion. Connectors have a hole in the tip for ground wire. Solid copper to copper connections only. Nos. 15-095; 19-095 and 25-095: minimum 2 #14, maximum 4 #12 wire connections. For wire tying, bundling and other fastening uses. Meets flammability classification UL94V-2. Flexible shape conforms to wires and cables. Holds harnesses, cables and tubing for construction, maintenance and assembly-line operations. Tough, durable, yet extremely lightweight with clean, smooth edges for easy handling. Working temperature range of -66 to 340 degrees F.
Gardner Bender PPC-1538 1-Hole Cable Clamp Gardner Bender PPC-1550 1-Hole Cable Clamp Gardner Bender PPC-1575 1-Hole Cable Clamp
Flexible shape conforms to wires and cables. Holds harnesses, cables and tubing for construction, maintenance and assembly-line operations. Tough, durable, yet extremely lightweight with clean, smooth edges for easy handling. Working temperature range of -66 to 340 degrees F. Flexible shape conforms to wires and cables. Holds harnesses, cables and tubing for construction, maintenance and assembly-line operations. Tough, durable, yet extremely lightweight with clean, smooth edges for easy handling. Working temperature range of -66 to 340 degrees F. Flexible shape conforms to wires and cables. Holds harnesses, cables and tubing for construction, maintenance and assembly-line operations. Tough, durable, yet extremely lightweight with clean, smooth edges for easy handling. Working temperature range of -66 to 340 degrees F.
Gardner Bender PPC-1600 1-Hole Cable Clamp Gardner Bender GSE-205 Service Entrance Strap Intertape 85832 Electrical Tape
Flexible shape conforms to wires and cables. Holds harnesses, cables and tubing for construction, maintenance and assembly-line operations. Tough, durable, yet extremely lightweight with clean, smooth edges for easy handling. Working temperature range of -66 to 340 degrees F. Plastic insulated straps secure service entrance cable. Electro-zinc plated nails. Cradles constructed of polyethylene. Straps stabilized against UV rays and extreme cold, withstands deterioration and breakage. For use up to 600 volts. PVC film coated with a non-corrosive rubber based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead free. Temperature range from 32 to 176 degrees F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general purpose maintenance and repair. 7 mil. thick. UL Listed and CSA Certified.
   
 
1 2 3 ... 31